[Zhongbo.com] The linear edging machine (straight edge machine, round edge machine, beveling machine) works by clamping the glass with the front and rear pressure plates and driving its linear motion for grinding. There are two points to note when using: 1. The front and rear pressure plate and the guide rail joint surface should be lubricated frequently, otherwise the normal service life of the machine will be affected by the premature wear of the front and rear pressure plate and the guide rail working surface. Although some models have automatic lubrication devices, it is also necessary to check whether the lubrication lines are unblocked; 2. When clamping the glass, the clamping force should be appropriate. Too loose will affect the grinding quality. Too tight will increase the load of the machine, which is easy to produce jitter and creep. It is easy to crush the glass when grinding thin glass. The clamping force can be tested on the machine with a slightly larger glass clamp, that is, the glass is clamped in the middle of the machine. When the machine is stopped, the glass is forced to move the glass with both hands, and it is suitable to adjust the clamping force to just move the hands. Precautions when using the glass profiler: 1. At the time of assembly, the manufacturer has self-grinded the five sets of suction cup holders, and selected the suction cup glue with the same thickness to keep the height of each suction cup consistent. Therefore, under normal circumstances, do not disassemble the suction cup. If the suction pad is damaged, choose a uniform thickness to replace it. 2. After using the special-shaped machine vacuum pump for a period of time, the vacuum degree will drop due to water inflow (ie, the suction is reduced). Therefore, it is necessary to pay attention to check and eliminate the fault. Otherwise, the machine will work under the condition of insufficient suction, which will affect the other side. Grinding quality, on the other hand, is prone to safety incidents. Note on the use of bilateral edging machines: 1. The bilateral edging machine is a better edging machine. It is fixed by two to three people during use to ensure correct operation. 2. When there is an error or malfunction in the procedure of the bilateral grinding, it is recommended that the original manufacturer send personnel to repair and debug. Under normal circumstances, do not dismantle it, so as to avoid disruption of the program.
Carbon fiber fabric is a type of textile made from carbon fibers. It is known for its high strength-to-weight ratio and is used in a variety of applications that require lightweight, durable materials.
Carbon Fiber Fabric,Carbon Fiber Fabric Roll,Carbon Fiber Fabric Sheets,Twill Weave Carbon Jiangyin Phecda New Material Technology Co., Ltd , https://www.jiangyinphecda.com
June 30, 2024