Six factors help you save sandblasting abrasives

[China Glass Net] Sandblasting abrasives such as garnet sand are consumables in the sandblasting process. Just like the oil used in automobiles, although it is not used at a time, it must be used. Therefore, although it is a low-value product, but because of the large amount, the impact on the cost of sandblasting is still very large, then how can we save the abrasive in the usual sandblasting work? Rizhao Garnet Mining believes that you can start with the following six factors.

Of course, these are based on the high-quality sand blasting machine you buy. The six factors we are talking about are: separator, dust collector, abrasive recovery device, spray gun, sand pipe, pressure. Let's take a detailed analysis.

1, separator

Separator is a more important part of saving abrasive. There are two kinds of separators, one is pneumatic sorting and the other is mechanical sorting. The general sandblasting machine is pneumatic sorting. Before purchasing the sand blasting machine, the user can accurately inform the manufacturer of the type and particle size of the abrasive before the process is better determined, so that the design of the sand blasting machine can be more accurately controlled. The closed air valve at the lower part of the separator is adjusted once in position before use.

2, dust collector

The air volume of the dust collector directly leads to the loss of the abrasive. Before the sand blasting machine is used, the dust collector damper is adjusted to a better position to lock. Clean the filter cartridge inside the dust collector on time, and then pour the waste sand inside the dust collector bell.

3. Abrasive recovery device

There are two kinds of abrasive recovery devices, one for pneumatic recovery and one for mechanical recovery. If the blasting machine abrasive uses non-metal, it is recommended to use pneumatic recovery. If the abrasive uses metal abrasive, it can be used in both cases. Because non-metallic uses mechanical recycling, the abrasive is easily scraped by the spiral, causing waste. Pomegranate sand is a non-metallic abrasive, so use it for sandblasting to remove rust.

4, the spray gun

The impact of the spray gun is mainly due to its wear and tear. If the spray gun is seriously worn, the consumption of sand will increase greatly. Therefore, the nozzle, sand nozzle, air nozzle, gun body, etc. of the spray gun should be regularly inspected during use. , you need to replace the new parts immediately.

5, sand tube <br> <br> As this factor, there are a lot of people do not agree with this more or no attention to this factor. In fact, the direction of the sand tube completely controls the direction of the abrasive, so the bending of the sand tube will affect the angle of the abrasive sprayed onto the surface of the workpiece. We know that one of the factors affecting the sandblasting effect is the angle. Therefore, the sand pipe is also an important factor of influence. In order to avoid the loss, the bending of the sand pipe must be reduced.

6, pressure

The size of the pressure directly leads to the speed of the efficiency, and also directly leads to the loss of the abrasive. If at a better pressure, the faster efficiency and the smaller loss of the abrasive are made. To know the accurate data, this needs to be seen by the user. Product requirements and materials, such as aluminum products, pre-oxidation treatment, better pressure of about 4 kg.

Of course, the above is only a summary of the theory and some staff in practice, not necessarily suitable for all industries or all sand blasting machines, because different industries have different requirements for sand blasting. Just as not all sandblasting must be treated with garnet or brown fused alumina. Rizhao Garnet Mining welcomes you to call us.

Hololive English -Myth-

Hololive Vtuber Cosplay Costume

Hololive Production (stylized in lowercase) is a virtual YouTuber (VTuber) talent agency owned by Japanese tech entertainment company Cover Corporation. As of 2021, the agency manages more than 50 VTubers between its branches; talents included Usada Pekora, Houshou Marine, Shirakami Fubuki, Inugami Korone, Gawr Gura, Mori Calliope, Minato Aqua, and Akai Haato, among many others. With Anycolor's Nijisanji, Hololive is one of the two major corporate VTuber agencies.

Hololive English Myth,Hololive English -Myth- Cos,Hololive English -Myth- Cosplay,Hololive English -Myth- Costume

Wuhan Mengman Trading Co., Ltd , https://www.ladybugcosplay.com